Video transcript
Why is your business electric bill so high? Our guide covers five bill drivers. A: 15-minute peak demand charges ($/kW). B: Rate option mismatch.
C: 4 to 9 p.m. time-of-use exposure and Critical Peak Pricing (CPP). D: Demand boundary creep, crossing 20 kW or 200 kW. E: Unbundled CCA generation, power factor and older solar TOU periods.
In July 2026, California's average commercial price reached 30.56 cents per kWh. More than double the 14.53 cents per kWh U.S. average (EIA).
A commercial electric bill in California is driven by much more than how many kilowatt-hours (kWh) your building uses. First, California's average commercial electricity price reached 30.56 cents per kWh in July 2026 — more than double the 14.53 cents per kWh U.S. commercial average (EIA Electric Power Monthly, Table 5.6.A). Second, for most buildings above 20 kW of peak demand, monthly demand charges ($/kW), time-of-use windows (4:00 p.m. to 9:00 p.m.) and rate option selection can account for a third to more than half of the total bill.
1. California commercial rates start at more than 2x the U.S. average
Before looking at your building's specific meter data, the baseline price of commercial electricity in California is among the highest in the country. According to the U.S. Energy Information Administration (Table 5.6.A, retrieved October 2, 2026), the average retail price paid by commercial customers in California rose from 30.08 cents per kWh in July 2025 to 30.56 cents per kWh in July 2026, compared with a U.S. commercial average of 14.53 cents per kWh.
Across California's three large investor-owned utilities — Southern California Edison (SCE), San Diego Gas & Electric (SDG&E) and Pacific Gas and Electric (PG&E) — utility delivery costs (transmission, distribution, wildfire mitigation and public purpose programs) are recovered through a combination of fixed monthly customer charges, per-kW demand charges and per-kWh delivery charges.
2. Five bill drivers that make one building pay far more than another
Two buildings of the same square footage on the same street can pay very different effective prices per kWh. Five line items explain almost all of the difference:
Driver A: 15-minute peak demand charges ($/kW)
Once a commercial account's monthly peak exceeds 20 kW (on SCE Schedule TOU-GS-2, for example), the utility bills for both total energy volume (kWh) and peak power draw (kW) measured in 15-minute intervals. Under SCE's October 1, 2026 rates (Advice Letter 5897-E, Sheet 91745-E), a building on TOU-GS-2 Option D pays:
- $28.01 per kW for its highest 15-minute peak at any hour of the month (facilities-related demand), plus
- $25.40 per kW in summer (June–September) or $7.64 per kW in winter (October–May) for its highest 15-minute peak between 4:00 p.m. and 9:00 p.m. on a non-holiday weekday.
On a summer month on bundled TOU-GS-2 Option D, a single 100 kW afternoon peak between 4:00 p.m. and 9:00 p.m. costs $5,341.00 in demand charges ($2,801.00 facilities + $2,540.00 summer on-peak) before adding a single kilowatt-hour of energy (see how SCE demand charges work).
Driver B: Rate option mismatch (Option D vs. Option E or Option DD)
California commercial schedules contain multiple rate options inside the same size class. On SCE TOU-GS-2, Option D (Sheet 91745-E) carries a $28.01/kW facilities demand charge and a $0.19358/kWh bundled summer on-peak energy price, whereas Option E (Sheet 91746-E, as revised by Advice Letter 5897-E-A) cuts the facilities demand charge to $14.27/kW and raises the bundled summer on-peak energy price to $0.75579/kWh. Buildings with short operating hours or spiky equipment loads often overpay on default Option D because their peak kW is high relative to their monthly kWh. Evaluate whether Option E or a storage-based option (Option DD) fits.
Driver C: 4:00 p.m. to 9:00 p.m. time-of-use exposure and Critical Peak Pricing (CPP)
All three major California investor-owned utilities price the 4:00 p.m. to 9:00 p.m. window as the highest-cost period of the day. In addition, many commercial accounts were historically auto-enrolled in Critical Peak Pricing (CPP), which imposes steep surcharges on 12 to 15 summer/fall event afternoons. On SCE schedules, CPP became optional on October 1, 2026, but accounts already enrolled stay on CPP unless they opt out (see our guide to SCE's October 1, 2026 rate change).
Driver D: Demand boundary creep (crossing 20 kW or 200 kW)
Utilities assign your rate class based on how many kilowatts your meter hits across the year. On SCE tariffs, exceeding 20 kW in three months of a rolling 12-month period moves an account from TOU-GS-1 up to TOU-GS-2 (which carries a $232.74/month customer charge and $28.01/kW facilities demand charge on Option D). Crossing 200 kW moves an account to TOU-GS-3 (which carries a $1,188.00/month customer charge and $31.85/kW facilities demand charge on Option D). Conversely, if a building's peak demand has fallen below the threshold for 12 consecutive months, it may remain on the larger schedule until a rate review is requested.
Driver E: Unbundled CCA generation, power factor and older solar TOU periods
Many California businesses buy generation from a Community Choice Aggregator (CCA) while paying SCE, SDG&E or PG&E for delivery. Even on CCA service, SCE bills the full $28.01/kW facilities demand charge and $12.54/kW summer peak delivery demand charge on TOU-GS-2 Option D, while the CCA bills generation separately. Meanwhile, buildings with older solar systems that still have grandfathered midday peak windows will move to the current 4:00 p.m. to 9:00 p.m. peak windows no later than July 31, 2027 (December 31, 2027 for schools; Sheet 91763-E).
Quick diagnostic: which part of your bill is out of line?
| What you see on the bill | Most likely root cause | What to review first |
|---|---|---|
| Demand charges ($/kW) are over 40% of the total bill | Low load factor (high 15-minute kW peak relative to monthly kWh) on a demand-heavy option such as SCE Option D | Compare Option D against Option E (see our SCE demand-charge guide) |
| Peak kW is just above 20 kW (or just above 200 kW) | Account crossed a rate-class boundary into TOU-GS-2 ($232.74/mo customer charge) or TOU-GS-3 ($1,188.00/mo customer charge) | Check 12-month peak history for eligibility to step down a rate class |
| Sharp bill spikes on hot summer afternoons | Account is enrolled in Critical Peak Pricing (CPP) and cannot curtail load from 4:00 to 9:00 p.m. | Compare annual CPP credits against event-day charges; opt out of CPP if net negative |
| Solar produces all midday, yet the monthly bill barely dropped | Solar shaves cheap daytime kWh while 4-9 p.m. demand and facilities kW peaks remain untouched | Evaluate whether Option E or a storage-based option (Option DD) fits, and review demand windows |
Frequently asked questions
What is a normal electric bill for a small or medium business in California?
There is no single normal dollar amount because two buildings of the same size can sit on different rate schedules and have very different 15-minute peak kW draws. A useful check is your effective price per kWh (total bill divided by total kWh): in July 2026 the California commercial average was 30.56 cents per kWh (EIA Table 5.6.A). If your effective price is far above that, demand charges or a mismatched rate option are usually the reason.
Can I switch my business to a different SCE rate option?
Yes, if your account meets the eligibility rules for that option (for example, Option D versus Option E on TOU-GS-2 or TOU-GS-3, Option DD for customers with qualifying energy storage under SCE Sheet 91743-E, or opting out of Critical Peak Pricing). Option R is closed to new customers. SCE generally requires an account to stay on a voluntary rate option for 12 months before switching again, so it pays to run the full 12-month math before requesting a change.
Does turning off lights or adjusting thermostats lower demand charges?
Only if it reduces your building's single highest 15-minute kilowatt peak of the month (or your highest 15-minute peak between 4:00 p.m. and 9:00 p.m. on weekdays). Lowering general kWh usage during off-peak hours saves energy charges, but if your heavy equipment still overlaps for one 15-minute interval, your demand charges will not drop.
Sources & tariff citations
- U.S. Energy Information Administration (EIA), Electric Power Monthly, Table 5.6.A (July 2025 and July 2026 preliminary; retrieved October 2, 2026)
- SCE Advice Letters 5897-E and 5897-E-A (Schedule TOU-GS-2 Sheets 91745-E, 91746-E, 91763-E and Schedule TOU-GS-3 Sheet 91771-E, effective October 1, 2026)
Related guides
- What SCE's October 1, 2026 rate change means for businesses
SCE changed business rates on Oct 1, 2026. CPP is now optional, Option DD opens for qualifying energy storage, and demand, customer and energy charges shifted. - How SCE time-of-use periods and demand charges work for businesses
A plain guide to SCE's peak hours for business rates and how the two kinds of demand charges are billed, using rates in effect Oct 1, 2026. - Why did my business electric bill go up?
A business electric bill can rise after a rate change, the June 1 season switch, one demand spike or a longer billing cycle. Here is what those changes mean. - What is a demand charge? SCE business demand charges explained
What is a demand charge? It is the part of a business bill set by your peak kW. See how SCE measures it, with a worked TOU-GS-2 example at Oct 1, 2026 rates. - SCE Option D vs Option E: which business rate option fits your building?
SCE Option E or Option D? Compare both on TOU-GS-2 and TOU-GS-3 with rates effective Oct 1, 2026, plus a worked July example that shows the math.